Detect the fax board channels on the Remote Modem Server

Using the following procedure, you will detect the fax board channels on the Remote Modem Server. Once the Omtool Server detects these channels, it can begin sending and receiving faxes.

To detect the fax board channels on the Remote Modem Server:

1. Log on to the system where the Modem Server software has been installed.

2. Start the Administrator.

3. Click Connectors in the console tree.

4. Right-click the Telco connector in the details pane and select Properties.

5. Click the Channels tab.

6. Click the Detect Channels button.

7. Type the IP address or machine name of the Remote Modem Server in the Server Address text box and click Next.

8. Click OK to save your changes to the connector.

Note: You can configure fax board channels uniquely for sending and receiving faxes. A channel can be configured to send only, receive only, or send and receive.

Now that you have detected the channels on the Remote Modem Server, it will begin sending and/or receiving faxes for the Omtool Server.